<![CDATA[OpenIMU300ZA: Settling time]]>Regards to OpenIMU300ZA, we noticed that usually it takes 15-20 minutes in the start to settle down and then it gives the proper heading information. Is this normal behavior and how can we reduce / eliminate this settling time for proper heading information.

]]>https://forum.aceinna.com//topic/132/openimu300za-settling-timeRSS for NodeTue, 17 Mar 2026 10:03:27 GMTTue, 07 Jan 2020 11:16:19 GMT60<![CDATA[Reply to OpenIMU300ZA: Settling time on Tue, 07 Jan 2020 11:16:19 GMT]]>Regards to OpenIMU300ZA, we noticed that usually it takes 15-20 minutes in the start to settle down and then it gives the proper heading information. Is this normal behavior and how can we reduce / eliminate this settling time for proper heading information.

]]>https://forum.aceinna.com//post/601https://forum.aceinna.com//post/601Tue, 07 Jan 2020 11:16:19 GMT<![CDATA[Reply to OpenIMU300ZA: Settling time on Wed, 08 Jan 2020 02:28:20 GMT]]>pls refer to topic_11:
https://forum.aceinna.com/topic/93/top-topics-of-common-operations-with-openimu-products/2

after mag-align, hope will met your request.

]]>https://forum.aceinna.com//post/602https://forum.aceinna.com//post/602Wed, 08 Jan 2020 02:28:20 GMT<![CDATA[Reply to OpenIMU300ZA: Settling time on Thu, 16 Jan 2020 07:35:57 GMT]]>we are doing mag alignment and getting soft iron>0.9, still the reading takes 15-20 minutes to settle down to a final value.
what could be the reason and how to solve it.

]]>https://forum.aceinna.com//post/605https://forum.aceinna.com//post/605Thu, 16 Jan 2020 07:35:57 GMT<![CDATA[Reply to OpenIMU300ZA: Settling time on Fri, 17 Jan 2020 04:50:18 GMT]]>could you provide some log file?

]]>https://forum.aceinna.com//post/607https://forum.aceinna.com//post/607Fri, 17 Jan 2020 04:50:18 GMT