<![CDATA[Set IMU orientation error]]>Hello,

I can't seem to be able to set the orientation of the IMU through UART. I always get "invalid parameter value" response, even when leaving the bytes to zero (standard orientation).

Here is the message I send : 55 55 75 50 0c 07 00 00 00 00 00 00 00 00 00 00 00 E0 C1

Thanks.

]]>https://forum.aceinna.com//topic/169/set-imu-orientation-errorRSS for NodeThu, 14 May 2026 04:37:53 GMTMon, 15 Jun 2020 14:18:10 GMT60<![CDATA[Reply to Set IMU orientation error on Mon, 15 Jun 2020 14:18:10 GMT]]>Hello,

I can't seem to be able to set the orientation of the IMU through UART. I always get "invalid parameter value" response, even when leaving the bytes to zero (standard orientation).

Here is the message I send : 55 55 75 50 0c 07 00 00 00 00 00 00 00 00 00 00 00 E0 C1

Thanks.

]]>https://forum.aceinna.com//post/822https://forum.aceinna.com//post/822Mon, 15 Jun 2020 14:18:10 GMT<![CDATA[Reply to Set IMU orientation error on Tue, 30 Jun 2020 00:54:56 GMT]]>The set orientation +X+Y+Z, you could run command: 55 55 75 50 c 7 0 0 0 2b 58 2b 59 2b 5a 0 0 cf 86.
And you could also use our UART CLI generation tool to get command line. The link address is https://developers.aceinna.com/devices/tools/uart-cli
1593478252092.jpg

]]>https://forum.aceinna.com//post/850https://forum.aceinna.com//post/850Tue, 30 Jun 2020 00:54:56 GMT