<![CDATA[I have the OpenIMU300RI I need to connect to a PLC s-1200]]>hello ACEINNA people, I have the OpenIMU300RI and I need to connect to a s7-1200 PLC through the RS232 module of the PLC, I made the connection but the data it shows is not as it says in https://openimu.readthedocs.io/en/latest/software/UARTmessaging.html I have tried with different transmission speeds such as 38400, 57600, 115200, but it does not work, it is supposed to send the 0x5555 data as header but it does not work

so I need to know the following:

  1. the communication of the OpenIMU300RI at how many baud is configured by default?.

2.-I DO NOT HAVE THE ST-LINK J-TAG EVALUATION KIT, my question is how can I configure the transmission speed (baud)?
Thank you

]]>https://forum.aceinna.com//topic/266/i-have-the-openimu300ri-i-need-to-connect-to-a-plc-s-1200RSS for NodeWed, 22 Apr 2026 18:18:04 GMTFri, 30 Apr 2021 14:47:47 GMT60<![CDATA[Reply to I have the OpenIMU300RI I need to connect to a PLC s-1200 on Fri, 30 Apr 2021 14:47:47 GMT]]>hello ACEINNA people, I have the OpenIMU300RI and I need to connect to a s7-1200 PLC through the RS232 module of the PLC, I made the connection but the data it shows is not as it says in https://openimu.readthedocs.io/en/latest/software/UARTmessaging.html I have tried with different transmission speeds such as 38400, 57600, 115200, but it does not work, it is supposed to send the 0x5555 data as header but it does not work

so I need to know the following:

  1. the communication of the OpenIMU300RI at how many baud is configured by default?.

2.-I DO NOT HAVE THE ST-LINK J-TAG EVALUATION KIT, my question is how can I configure the transmission speed (baud)?
Thank you

]]>https://forum.aceinna.com//post/1122https://forum.aceinna.com//post/1122Fri, 30 Apr 2021 14:47:47 GMT