<![CDATA[MTLT305D internal CAN termination]]>In section 2.1.3 of revision 07 of the MTLT305D/M Series User's Manual it states:
"CAN 120 ohm termination resistor is by default disabled. For systems requiring 120 CAN termination be present in the MTLT305D/M, it can be enabled and permanently saved through the RS232 port."
In revision 10 of the same document it states that
"CAN 120 ohm termination resistor is not present"
Does the MTLT305D have internal CAN termination that can be enabled, or was revision 07 in error?

]]>https://forum.aceinna.com//topic/409/mtlt305d-internal-can-terminationRSS for NodeSun, 10 May 2026 17:47:05 GMTSat, 22 Jul 2023 07:02:59 GMT60<![CDATA[Reply to MTLT305D internal CAN termination on Sat, 22 Jul 2023 07:02:59 GMT]]>In section 2.1.3 of revision 07 of the MTLT305D/M Series User's Manual it states:
"CAN 120 ohm termination resistor is by default disabled. For systems requiring 120 CAN termination be present in the MTLT305D/M, it can be enabled and permanently saved through the RS232 port."
In revision 10 of the same document it states that
"CAN 120 ohm termination resistor is not present"
Does the MTLT305D have internal CAN termination that can be enabled, or was revision 07 in error?

]]>https://forum.aceinna.com//post/1559https://forum.aceinna.com//post/1559Sat, 22 Jul 2023 07:02:59 GMT<![CDATA[Reply to MTLT305D internal CAN termination on Mon, 12 Jan 2026 14:56:57 GMT]]>Hi, there is no CAN termination resistor in the ML305D

]]>https://forum.aceinna.com//post/1625https://forum.aceinna.com//post/1625Mon, 12 Jan 2026 14:56:57 GMT