<![CDATA[cannot connect with server.py]]>Hello,

I am getting the following messages with server.py:

server_version: 1.1.1
scanning ports
Testing port COM17
Testing port COM18
Testing port COM15
Testing port COM16
'utf-8' codec can't decode byte 0xb1 in position 3: invalid start byte

I don't seem to be able to connect to the OpenIMU330BI EVK at all. In updating the firmware, I may have inadvertently removed the write protection on sectors 58-63, could that be part of this problem?

Thanks for your assistance.

]]>https://forum.aceinna.com//topic/95/cannot-connect-with-server-pyRSS for NodeSat, 08 Aug 2026 23:02:13 GMTTue, 22 Oct 2019 21:29:11 GMT60<![CDATA[Reply to cannot connect with server.py on Tue, 22 Oct 2019 21:29:11 GMT]]>Hello,

I am getting the following messages with server.py:

server_version: 1.1.1
scanning ports
Testing port COM17
Testing port COM18
Testing port COM15
Testing port COM16
'utf-8' codec can't decode byte 0xb1 in position 3: invalid start byte

I don't seem to be able to connect to the OpenIMU330BI EVK at all. In updating the firmware, I may have inadvertently removed the write protection on sectors 58-63, could that be part of this problem?

Thanks for your assistance.

]]>https://forum.aceinna.com//post/370https://forum.aceinna.com//post/370Tue, 22 Oct 2019 21:29:11 GMT<![CDATA[Reply to cannot connect with server.py on Wed, 23 Oct 2019 01:44:19 GMT]]>yes, you need to keep protection on sectors 58-63 for 330, or it will be send the packet which cannot identified by Server.

]]>https://forum.aceinna.com//post/372https://forum.aceinna.com//post/372Wed, 23 Oct 2019 01:44:19 GMT