<![CDATA[UART connection for flashing: OpenIMU300RI]]>Hi All,

I do not have the eval kit yet on hand, and have been unable to establish UART comms to our Windows laptop. We're using a FTDI USB To UART converter (3.3 of 5V configurable) and have had no luck figuring out the baud rate, default voltage settings, or how to get NavView to connect at all.

Thanks in advance.

Josh

]]>https://forum.aceinna.com//topic/283/uart-connection-for-flashing-openimu300riRSS for NodeSat, 07 Mar 2026 02:20:31 GMTWed, 30 Jun 2021 21:06:09 GMT60<![CDATA[Reply to UART connection for flashing: OpenIMU300RI on Wed, 30 Jun 2021 21:06:09 GMT]]>Hi All,

I do not have the eval kit yet on hand, and have been unable to establish UART comms to our Windows laptop. We're using a FTDI USB To UART converter (3.3 of 5V configurable) and have had no luck figuring out the baud rate, default voltage settings, or how to get NavView to connect at all.

Thanks in advance.

Josh

]]>https://forum.aceinna.com//post/1166https://forum.aceinna.com//post/1166Wed, 30 Jun 2021 21:06:09 GMT<![CDATA[Reply to UART connection for flashing: OpenIMU300RI on Fri, 02 Jul 2021 02:25:15 GMT]]>Please take a look of the page https://developers.aceinna.com/devices/connect, and try to use python-openimu to connect.

]]>https://forum.aceinna.com//post/1178https://forum.aceinna.com//post/1178Fri, 02 Jul 2021 02:25:15 GMT<![CDATA[Reply to UART connection for flashing: OpenIMU300RI on Fri, 02 Jul 2021 02:57:59 GMT]]>for 300RI is same connector with MTLT305D, so pls refer to one topic below:
https://forum.aceinna.com/topic/40/pc-cannot-detect-rs232
you need converter of RS232 and usb, 4.9-32V is ok for 300RI.

]]>https://forum.aceinna.com//post/1179https://forum.aceinna.com//post/1179Fri, 02 Jul 2021 02:57:59 GMT<![CDATA[Reply to UART connection for flashing: OpenIMU300RI on Tue, 01 Feb 2022 06:19:47 GMT]]>@joshgc Have you figured it out? I am facing the same problem

]]>https://forum.aceinna.com//post/1322https://forum.aceinna.com//post/1322Tue, 01 Feb 2022 06:19:47 GMT