Every printer is different, but these general guidelines help:

• Layer height: 0.16–0.2 mm for good detail and smoother surfaces.
• Infill: 15–30% for most toys; more for spinners needing weight.
• Perimeters (walls): 2–4 walls for stronger parts.
• Print speed: 40–60 mm/s for better accuracy on moving parts.
• Supports: Avoid where possible on print-in-place joints; design around overhangs.
• Bed adhesion: Use a brim if parts have small footprints.
  https://3dprintedworld.com/shop/