OpenRTK330 as Base Station

Is the OpenRTK330 unit capable of running as an RTK base station similar to the U-Blox M9?

Yes, OpenRTK330 can be used as a low-cost base station. There is some setup that is required.

Base station data transmitting via. USB/UART

UART/USB => ready to go

• The customer need software (called ntrip server, for example, open-source rtklib str2svr) to read the data from UART/USB and send raw data to ntrip server/caster (for example, Aceinna Ntrip server)

• Can set another OpenRTK330 access Mountpoint OpenRTK_BASE

• Broadcast RTCM coordinates (1005/1006) using software

What settings are required for OpenRTK330L? Does it mean that the settings on the OpenRTK330L side are unnecessary just by registering the server in the software on the Ntrip Caster side?

@Nishimoto said in OpenRTK330 as Base Station:

What settings are required for OpenRTK330L? Does it mean that the settings on the OpenRTK330L side are unnecessary just by registering the server in the software on the Ntrip Caster side?

Yes, If you want to know more about the operation of OpenRTK330 you can supply your email address, i will send you a document about it.