Posts made by yyzakaria

we are doing mag alignment and getting soft iron>0.9, still the reading takes 15-20 minutes to settle down to a final value.
what could be the reason and how to solve it.

Regards to OpenIMU300ZA, we noticed that usually it takes 15-20 minutes in the start to settle down and then it gives the proper heading information. Is this normal behavior and how can we reduce / eliminate this settling time for proper heading information.

Is there a way we can directly communicate to OpenIMU300ZA directly through serial commands, rather that using web interface via server.

We have received OpenIMU300ZA DMC .

Can we get any heading and elevation reading through NAVVIEW software or any other GUI without performing any programming (for a factory default received dmc).