- check the serial data, what is sending from IMU now? your pic
Cannot connect to OpenIMU330BI EVK
I cannot get any data from the IMU over HTerm.
After establishing communication with the ST_LINK Utility, I tried to connect to each of the 5 COM ports using HTerm while the ST-LINK/V2 debugger LED is flashing alternately green and red. I could not get any data from the IMU over HTerm.
I also disconnected the IMU with the ST-LINK Utility and then again tried to connect to each of the 5 COM ports using HTerm while the ST-LINK/V2 debugger LED is constant red. I could not get any data from the IMU over HTerm.
- unlock the sectors
- upload bin file
- lock the sectors
- restart the IMU
if right steps, it will working on well IMU HW.
pls show pics of above steps, let's try again.
I performed the steps above exactly as listed. Here is a screenshot of the ST-LINK Utility after successfully uploading the bin file, locking the sectors, and restarting the IMU:
I immediately saw good data over HTerm on COM14:
However, I still cannot connect to the OpenIMU Monitor at developers.aceinna.com/devices/record-next
What next steps should I take?
@say Hi Say，Now you have flashed the right image, the unit output the z1 package via uart interface. please use chrome browser, download the "IMU Server Ready-to-Use (Windows)" and try again.
I downloaded the IMU Server Ready-To-Use (Windows) using the Chrome browser and installed it as shown above. I still cannot connect to the IMU using ANS. After opening ANS, when I run Server_win32_1.1.1, a DOS console window opens briefly as shown here:
It gives the message as shown: "Cannot configure port, something went wrong. Original message: .."
How should I correct this problem?
First, pls save(backup) whole EEPROM bin file, and send to us. we need to check deeply.
follow the steps in topic_5, address 0x08000000, size 0x30000.
Second, pls use the testing server.exe try again, if still not, pls send to us the Server_log file which in same file with server.exe
thanks a lot.
@say Hi say, if the IMU Server Ready-To-Use (Windows) could connected with the OpenIMU330BI successfully, there will be the log . The log picture you upload is Blurred, please send us a new one. BTW, could you send us a photo how you connected OpenIMU330BI with your computer. And if you could change a PC or USB port and test again?
I downloaded the EEPROM bin file and ran the server file you sent me with the log. I cannot attach them here. How do I send these files to you?
Here is a screenshot of the server log file:
send to us your saved EEPROM bin file and Server_log, by
firstname.lastname@example.org email to me
upload under the forum topic in below steps:
I create one testing program for you, and we will fix the bug in next official release.
openIMU330BI not sending anything on UART at putty terminal, what problem may be there?
@jitendra ,sorry for reply you late.You mean you can't connect to navView?pls give us more information:
Do you have our EVK?
If you don't have EVK but you have your own communication circuit.Please provide your hardware and software information for our analysis.