Cannot connect to OpenIMU330BI EVK

@Li-YiFan

Hi Li-YiFan,

I downloaded the IMU Server Ready-To-Use (Windows) using the Chrome browser and installed it as shown above. I still cannot connect to the IMU using ANS. After opening ANS, when I run Server_win32_1.1.1, a DOS console window opens briefly as shown here:

da4e139a-2ee1-417e-a782-ec12a854764b-image.png

It gives the message as shown: "Cannot configure port, something went wrong. Original message: .."

How should I correct this problem?

First, pls save(backup) whole EEPROM bin file, and send to us. we need to check deeply.
follow the steps in topic_5, address 0x08000000, size 0x30000.

Second, pls use the testing server.exe try again, if still not, pls send to us the Server_log file which in same file with server.exe
server_191123_with_log_8000.exe
thanks a lot.

@say Hi say, if the IMU Server Ready-To-Use (Windows) could connected with the OpenIMU330BI successfully, there will be the log 2019-11-23_09h29_02.jpg . The log picture you upload is Blurred, please send us a new one. BTW, could you send us a photo how you connected OpenIMU330BI with your computer. And if you could change a PC or USB port and test again?

@cek

Hello cek,

I downloaded the EEPROM bin file and ran the server file you sent me with the log. I cannot attach them here. How do I send these files to you?

@Li-YiFan

Hi Li-YiFan,

Here is a screenshot of the Visual Studio Code terminal window after running server.py. It has the same output as Server_win32_1.1.1. The DOS command window disappears very quickly after running Server_win32_1.1.1, so the picture is blurry.

ff5a04d9-79e6-40fb-8054-874d66e30280-image.png

@cek

Here is a screenshot of the server log file:

3da2b60f-a09b-468f-ba4e-4f56e6ac82bc-image.png

send to us your saved EEPROM bin file and Server_log, by
ekchen@aceinna.com email to me
or
upload under the forum topic in below steps:
99e87d99-5d3b-468b-8662-22c5b8c98e47-image.png
b13513f7-c950-4abf-a7fc-ea3172d44dd5-image.png

How about changing a computer and test?

I create one testing program for you, and we will fix the bug in next official release.

server201911261700_testing.exe

openIMU330BI not sending anything on UART at putty terminal, what problem may be there?

@jitendra ,sorry for reply you late.You mean you can't connect to navView?pls give us more information:
Do you have our EVK?
If you don't have EVK but you have your own communication circuit.Please provide your hardware and software information for our analysis.

@jitendra ,This is my email address: rszhou@aceinna.com,You can send me the details via email.

Log in to reply