Here is the question from data logger supplier, maybe you can provide the answer to his question.
"If the CANedge2 is correctly connected to the Gyro CAN H/L - and the Gyro is broadcasting valid CAN data - then the CANedge2 will be able to log it. If the gyro utilizes a non-standard bit rate to broadcast the CAN data, this can be set in the CANedge2 configuration under the CAN_1 and CAN_2 sections. However, I think it would be simpler to first check if the Gyro is able to broadcast CAN data at a standard rate like 250k."
Can you understand what he is asking.